Explainer

Website visitor identification vs LinkedIn signals: what RB2B and Warmly can see

Website visitor identification tools put a script on your site and try to name the person or company behind each visit. RB2B and Warmly are the two people search for most. LinkedIn signals come from the other side: someone views your profile, comments on a competitor's post or starts a new job, and LinkedIn shows you who. For sellers in Australia and New Zealand the difference matters, because RB2B's own FAQ says its person-level matching won't identify anyone located outside the US. Below: what each kind of tool sees, what it cost on 1 November 2026, and where Bingle, which we make, fits.

7 days free. No card. Then US$79/mo · See pricing

By the Bingle team · Published 1 November 2026 · Researched from the sources listed below, drafted with AI help and checked against those sources

Short answer

Should you use website visitor identification or LinkedIn signals to find warm leads?

For a founder or small team selling in Australia, New Zealand or anywhere outside the US, Bingle is our pick: it watches LinkedIn signals such as profile views, engagement with competitors' and your own posts and job changes, ranks the people who fit and drafts each message for your OK, from US$49 a month after 7 free days with no card. Website visitor identification matches visits to your site with people or companies, but RB2B names individuals only for US visitors, Warmly starts at $10,000 a year, and Leadfeeder and Snitcher are built around naming companies. If most of your buyers are in the US and visit your site often, a visitor ID tool adds a signal Bingle doesn't watch.

Four website visitor ID tools and Bingle

Entry prices from each tool's own page on 1 November 2026. RB2B, Warmly, Leadfeeder and Snitcher show "$" with no currency code, so we haven't converted them.

How we compared

On 1 November 2026 we read the pricing pages and FAQs of RB2B, Warmly, Leadfeeder and Snitcher, RB2B's compliance page, Warmly's help article on its data, and LinkedIn's Sales Navigator plans and help pages on Buyer Intent, alerts and profile viewers, rendering the vendor pages in a headless browser. We didn't install any tracking script or run a trial, so every match rate here is the vendor's own figure.

We make Bingle, so weigh its entry and our pick with that in mind. The order isn't a ranking: each tool says who it suits and where it falls short.

Best forStarting price
RB2B
Teams selling into the US who want named visitors sent to SlackFree plan (companies only); Starter $79/mo
Warmly
Larger teams who want visitor ID, website chat and outbound on one contractFrom $10,000/yr ($4,875 a quarter), through sales
Leadfeeder
Teams who want to see which companies visit, with unlimited usersFree Lite plan; Discover from $79/mo billed annually
Snitcher
Small teams who want company-level visitor ID at a low entry priceFrom $49/mo billed annually ($79 monthly)
Bingle
Founders and small teams whose buyers are on LinkedIn, in Australia, New Zealand or anywhere7 days free, no card; then from US$49/mo

1. RB2B

Teams selling into the US who want named visitors sent to Slack · Free plan (companies only); Starter $79/mo

RB2B is a script for your site's header. When a visit matches its data, it sends the person's name and LinkedIn profile URL to Slack or Teams, and on Pro and above their business email to your CRM, Clay and other tools. Its FAQ says it matches visitors with first- and third-party cookies, device IDs and IP addresses, plus Demandbase's reverse-IP network for companies.

The free plan names companies only, 150 a month. Starter at $79 a month adds people, as LinkedIn URLs, 300 a month, with no emails or other integrations. Pro starts at $149 and Pro+ at $199. Its pricing table puts contact-level coverage at 15-20% on Starter and Pro and 35-45% on Pro+. The trial is 7 days with no card.

Watch out for: Person-level matching is US only. Its FAQ says it will not identify individuals located outside the US, and its compliance page says the person database holds only profiles matched to US home addresses. A visitor in Sydney or Auckland shows up as a company at most.

2. Warmly

Larger teams who want visitor ID, website chat and outbound on one contract · From $10,000/yr ($4,875 a quarter), through sales

Warmly identifies visitors and then acts on them: AI chat on the page, alerts and routing to reps, CRM sync, and retargeting by email, LinkedIn and ads. Its visitor identification page says it names people, with email, role and company, for 15-30% of typical B2B traffic, and companies for 30-60%.

AI Web-Deanonymization starts at $10,000 a year with 10,000 credits a month, or $4,875 a quarter. Inbound Chat starts at $20,000 a year and AI Inbound Autopilot at $30,000. Every plan's button says Talk To Sales.

Watch out for: Its help article says non-US traffic may have lower identification rates and that it doesn't identify individuals in Europe. Neither page mentions Australia or New Zealand, and the pricing page lists no free plan or trial.

3. Leadfeeder

Teams who want to see which companies visit, with unlimited users · Free Lite plan; Discover from $79/mo billed annually

Leadfeeder, part of Dealfront, reveals the companies visiting your site rather than the people, and its GDPR page says the data is hosted and processed on Amazon Web Services in Ireland. Its FAQ says it can identify a company even when the staff work from home.

Lite is free forever, with a 7-day visitor history and the last 100 companies a month. Discover is $79 a month billed annually, or $113 monthly, with alerts and CRM sync. Activate, from $369, adds verified emails and phone numbers for contacts at those companies. Every plan has unlimited users and a 14-day trial with no card.

Watch out for: You learn that someone from a company visited, not who. Finding the right person is a second step. Prices showed in "$" for us; the page may show another currency where you are.

4. Snitcher

Small teams who want company-level visitor ID at a low entry price · From $49/mo billed annually ($79 monthly)

Snitcher matches visitor IP addresses to companies, adds company data, and sends alerts to Slack or email and records to HubSpot, Salesforce, Pipedrive and other CRMs. Its FAQ says it focuses on company-level data and surfaces individual contact details only when you choose to reveal them.

Plans are priced by companies identified a month, with every feature and unlimited team members on each. Up to 50 companies is $49 a month on annual billing or $79 monthly. The trial is 14 days with no card.

Watch out for: The entry tier covers 50 companies a month, so count how many different companies reach your site first. The page lists contact-level identification with an asterisk it doesn't explain.

5. Bingle

Founders and small teams whose buyers are on LinkedIn, in Australia, New Zealand or anywhere · 7 days free, no card; then from US$49/mo

Bingle watches LinkedIn rather than your website: views of your profile, likes and comments on competitors' and influencers' posts, engagement with your own posts, job changes, hiring, funding and events. Its sources run every 6 hours by default and keep only people who fit your ideal customer. Each lead gets a 0 to 100 score blending fit with how strong and recent the signals are, and a line saying why they're worth a message now, with the date and a link.

It drafts each message in your voice, waits for your OK unless you switch review off, and sends from your own LinkedIn in your working hours. Any reply stops the sequence. Bingle never sees your LinkedIn password and works inside Claude and ChatGPT. Starter is US$49 a month, Growth US$79 and Agency US$149 for up to 3 LinkedIn accounts; see pricing.

Watch out for: It doesn't identify your website visitors, and it's LinkedIn only: no cold email, no contact database, no phone enrichment and no self-serve CRM integration. If your buyers rarely use LinkedIn, it has little to watch.

Our pick

Bingle is our pick for a founder or small team selling into Australia, New Zealand or elsewhere outside the US. RB2B's FAQ says its person-level matching won't identify individuals outside the US, and Warmly's help article says non-US traffic may match at lower rates. LinkedIn's help pages put no country limit on who viewed your profile or who reacted to a post. Bingle watches those signals, ranks the people who fit with the dated reason and drafts each message for your OK.

It costs US$49 a month for one person, or US$137 for three LinkedIn accounts on Growth. If most of your buyers are in the US and visit your site often, a visitor ID tool adds a signal Bingle doesn't watch: a named US visitor to your own site.

What website visitor identification does

Each tool works the same way: a script on your site records the visit and tries to match it to data it already holds. A company match usually comes from the IP address. A person match needs more, such as a cookie or device ID a data partner has tied to a real name; RB2B and Warmly both describe that mix in their own help pages.

So one label covers two products. Company-level identification tells you someone from a business looked at your pricing page. Person-level identification tells you who. Sellers want the second, and that's where the limits sit.

The vendors' match rates don't agree with each other, or always with themselves. RB2B's home page says it identifies 70-80% of traffic when person and company matches are combined, while its pricing table puts coverage at 15-20% on its lower plans. Warmly's visitor page says 15-30% at the person level; its help article says around 45% for contacts. Treat any figure as a ceiling until your own trial shows otherwise.

What LinkedIn signals show, and where LinkedIn shows them

A LinkedIn signal is something a person did on LinkedIn that LinkedIn shows you. Three matter most for selling, and none needs a script on your site.

SignalWhere you see itWho is namedLimit
Profile viewsYour profile's Analytics sectionViewers browsing with name and headline showingFree: three most recent viewers in 90 days. Premium: up to 365 days. Private-mode viewers stay anonymous, even to Premium
Reactions and commentsOn the post itselfEveryone who reacted or commented; LinkedIn treats these as publicPost analytics give counts and demographics, not names
Job changesSales Navigator alerts, or the person's profileLeads you savedAlerts need the lead saved first

What you learn about the person differs. A website visit says someone looked, and maybe which pages. A comment on a competitor's post about switching suppliers says what they're thinking about, in their words, with a date. A new job title says they have a fresh budget and a reason to review suppliers. Our page on LinkedIn buying signals lists every signal Bingle watches.

LinkedIn's privacy rules shape what you see. Its help centre says it adds a little noise to post viewer demographics, shows them only when enough people have viewed, and never shows the names of members browsing in private mode. Those pages set no country limit, so a viewer in Perth and one in Chicago are treated the same. LinkedIn also links the two worlds: with Sales Navigator Advanced (A$189.99 a month per licence) and the LinkedIn Insight Tag on your site, Buyer Intent alerts flag visits from people at accounts you've saved, showing a general profile rather than a name.

Side by side: a website visit and a LinkedIn signal

Website visitor identificationLinkedIn signals
Triggered by
A visit to your siteA profile view, a reaction or comment, a job change, a hiring post
What you learn
A company, sometimes a person, and the pages they sawA named person, what they did and when
Countries
Person-level often limited; RB2B is US onlyNo country limit in LinkedIn's help pages
Needs
A script on your site and enough trafficBuyers who use LinkedIn
Shows interest in competitors
No, only your own siteYes, through engagement with their posts
Privacy work for you
Privacy-policy and cookie wording; RB2B supplies samples and an opt-out pageEach member's LinkedIn settings decide what's shown
Entry cost
Free company-level plans; people from $79/mo on RB2B StarterA little on free LinkedIn; Bingle from US$49/mo

Visitor ID shows who is already looking at you. LinkedIn signals also show who is looking at your competitors, or has just started a job where they'll be buying. A Brisbane team selling to Australian businesses gets no person-level names from RB2B for its local visitors; LinkedIn shows its profile viewers and post engagers wherever they are.

Why it matters if you sell from Australia or New Zealand

RB2B is the clearest. Its FAQ says person-level ID "is US-only technology with a US-only database", and its compliance page says it uses IP ringfencing so only US traffic is resolved. Company-level ID is global, and the FAQ says companies outside the US can use person-level ID on their US traffic, so an Australian SaaS company with American visitors still gets those names.

Warmly makes no US-only statement on the pages we read, but its help article says non-US traffic may identify at lower rates, and it doesn't mention Australia or New Zealand. Leadfeeder and Snitcher sell company-level matching and publish no country coverage on their pricing pages.

Then there's privacy. RB2B's compliance page tells customers to describe the service in their privacy policy, supplies sample wording and a consumer opt-out link, and suggests talking to your own privacy counsel. Our post on the Privacy Act reforms and B2B prospecting covers the 2024 changes and the 2026 draft bill; get advice before adding any script that names visitors. For LinkedIn outreach at home, see our guides for Australia and New Zealand.

What one seller and three sellers pay each month

List prices on 1 November 2026, worked out by us, with Bingle's US dollars converted at the Reserve Bank of Australia's 30 October rate of US$0.7040. RB2B's and Warmly's pages don't mention seats; Leadfeeder and Snitcher include unlimited users.

ToolPriced by1 seller3 sellers
RB2B StarterPlan, 300 resolutions a month$79$79 (no seats mentioned)
Warmly AI Web-DeanonymizationPlan, from 10,000 credits a month$833 on annual ($10,000/yr), $1,625 on quarterlySame
Leadfeeder DiscoverPlan, unlimited users$79 billed annually, $113 monthlySame
Snitcher, up to 50 companiesCompanies identified$49 billed annually, $79 monthlySame
BinglePlanUS$49 (A$69.60)US$137 (A$194.60) on Growth with 2 extra LinkedIn accounts, or US$149 (A$211.65) on Agency

Visitor ID plans grow with your traffic rather than your team: RB2B charges 45 cents per resolution over the Starter allowance, and Snitcher's FAQ says you upgrade a tier when more companies visit than your plan covers. Bingle grows with LinkedIn accounts, and on annual billing charges 10 months for 12.

What to check on a trial

  1. Check where your visitors are. If your web analytics show little US traffic, a US-only person match has little to work with.
  2. Run the visitor ID trial for its full 7 or 14 days and count the named people you'd actually message. RB2B, Leadfeeder and Snitcher all start without a card.
  3. Decide what you'd say to each one. A visit to your pricing page can be the reason you write, but don't say you saw it: people feel tracked.
  4. Ask each vendor in writing how it handles Australian and New Zealand visitors, and what privacy wording it suggests.
  5. Compare the same fortnight on LinkedIn, using how to find leads showing buying signals.

For more signal tools, see the best LinkedIn buying signal tools; every head-to-head we've written is on the compare page.

Questions

Does RB2B work in Australia?

Only at company level for Australian visitors. RB2B's FAQ says its person-level ID is US-only and won't identify individuals located outside the US, while company-level ID is global. An Australian business can still use person-level ID on its US visitors.

How much does Warmly cost?

On 1 November 2026 Warmly's pricing page lists AI Web-Deanonymization from $10,000 a year, or $4,875 a quarter. Inbound Chat starts at $20,000 a year and AI Inbound Autopilot at $30,000, all through sales.

What's the difference between RB2B and Warmly?

RB2B identifies visitors and sends them to Slack, Teams or other tools, from a free company-level plan up, and names people only in the US. Warmly also chats with visitors, routes them to reps and runs follow-up, from $10,000 a year, and says non-US traffic may match at lower rates.

Can you see who viewed your LinkedIn profile for free?

Partly. LinkedIn's help centre says a free account shows the three most recent viewers in the last 90 days, if your own viewing setting shows your name and headline; Premium shows the full list for up to 365 days. Nobody sees the names of people browsing in private mode.

Does Bingle identify website visitors?

No. Bingle watches LinkedIn activity, such as profile views, post engagement and job changes, and drafts messages for your OK.

Sources

  1. RB2B, Pricing & plans. read 1 Nov 2026, rendered in a headless browser
  2. RB2B, Website visitor identification software (home page and FAQ). read 1 Nov 2026
  3. RB2B, Compliance. read 1 Nov 2026
  4. Warmly, Pricing. read 1 Nov 2026, rendered in a headless browser
  5. Warmly, Website visitor identification. read 1 Nov 2026
  6. Warmly Help, Overview of Warmly's Data & Data Quality. page says last updated 9 months ago; read 1 Nov 2026
  7. Dealfront, Leadfeeder pricing. read 1 Nov 2026, prices shown in $ through a US connection
  8. Leadfeeder, Home page and FAQ. read 1 Nov 2026
  9. Leadfeeder, GDPR Compliance and Data Transparency. read 1 Nov 2026
  10. Snitcher, Pricing. read 1 Nov 2026, annual and monthly prices both checked
  11. LinkedIn, Sales Navigator plans & pricing. read 1 Nov 2026
  12. LinkedIn Help, Sales Navigator Buyer Intent FAQ. read 1 Nov 2026
  13. LinkedIn Help, Sales Navigator alerts. read 1 Nov 2026
  14. LinkedIn Help, Who's viewed your profile differences between basic accounts and Premium accounts. read 1 Nov 2026
  15. LinkedIn Help, Who's viewed your profile visibility settings. read 1 Nov 2026
  16. LinkedIn Help, Post analytics for your content. read 1 Nov 2026
  17. Reserve Bank of Australia, Exchange rates. 30 Oct 2026 rate, read 1 Nov 2026

More from the blog

All posts

See who's looking right now

Your first leads show up in minutes, each with its reason. Free for 7 days, no card.

Not ready to start yet?

Now and then, an email about a new signal or something I've learned about timing outreach. Confirm by email, unsubscribe any time.