How-to

Account-based outreach on LinkedIn for small teams

Account-based marketing is usually written up for companies with a marketing team, an ad budget and a CRM full of accounts. The outreach half of it works for a founder or a team of two or three on LinkedIn, with a spreadsheet and a short list of companies. Below is the plain definition, then the version we'd run: pick the accounts, map who's who at each, watch company-level signals, write to several people without annoying the company, and count results by account.

7 days free. No card. Then US$79/mo · See pricing

By the Bingle team · Published 30 October 2026 · Researched from the sources listed below, drafted with AI help and checked against those sources

Short answer

How does a small team do account-based outreach on LinkedIn?

Pick 20 to 50 companies that fit your ideal customer, map the three to six people at each who would use, own or sign off on what you sell, and watch for company-level signals such as hiring, funding, a new leader or several staff engaging at once. Write to one or two people per company at a time, stop the whole company when anyone replies, and count progress in accounts that reached a conversation rather than messages sent. Bingle rolls each company's people up into one account, lifts the account when several of them engage, and can stop a sequence for the whole company on any reply.

How we researched this

On 30 October 2026 we read LinkedIn's 2016 primer on account-based marketing, LinkedIn's June 2024 newsroom post on B2B buying, LinkedIn's help page on ad targeting and the NSW Government's daylight saving page. What Bingle does with accounts comes from its user guide and the description of its connector for Claude and ChatGPT. The account counts and timings below are our suggestions, not measured results.

What account-based marketing means, in plain terms

LinkedIn Marketing Solutions put it this way in a primer published on 8 December 2016: "account-based marketers looked for their most valuable audience and tailored their messages directly to those few accounts, or even individuals." The same post adds that it was "a great way to get results, but hard to do at scale."

In outreach terms, you choose the companies first and the people second. Ordinary lead generation runs the other way: find anyone with the right title, at any company, and message them. Account-based outreach starts with a short list of named companies, works out who matters inside each, and judges success by whether the company engages, not whether one person accepted an invite.

Lead-based outreachAccount-based outreach
Starting point
A title and a locationA named list of companies
List size
Hundreds or thousands of people20 to 50 companies, a few people each
Who you write to
Whoever matchesSeveral roles at the same company, in an order you choose
What a reply does
Moves that one person onPauses everyone else at that company while you work out the next step
What you count
Invites, acceptances, repliesCompanies engaged, in conversation, won

The scale problem LinkedIn mentioned is the reason small teams should keep the list short. Research and personal messages take time per company, and a team of one can do that well for a few dozen companies, not a few hundred.

Pick 20 to 50 target accounts

Twenty to fifty is our suggestion for one person working the list part time. Below 20, a couple of quiet months can leave you with nothing to work on. Above 50, you stop knowing what's happening at each company, and the outreach drifts back into lead-based volume with a nicer name.

  1. Start from your ideal customer profile and pull the companies that match it on industry, headcount band and location.
  2. Keep the ones where you can name a reason to talk this quarter: they look like your best customers, they're hiring for the team you sell to, a new leader just joined, or someone there already follows or engages with you.
  3. Check you can see at least two of the right people at each company on LinkedIn. A company with nobody findable can't be worked on LinkedIn, however good the fit.
  4. Drop current customers and companies with an open deal, so this list never collides with a conversation already under way.
  5. Put the survivors in a sheet with columns for the company, why it's on the list, the people you've mapped, the last signal and its date, and where outreach stands.

Keep a bench of 10 to 20 more companies that nearly made it. When an account goes cold, swap one in from the bench instead of growing the list.

Map the buying group at each account

LinkedIn's newsroom, on 17 June 2024, said B2B buying cycles "typically involve 6 to 10 stakeholders." A small team can't write to ten people at 50 companies, and doesn't need to. Map three to six roles per account and contact them in an order that makes sense for the deal.

Example only: say you sell a sales-onboarding tool to software companies. A buying group at a 150-person software firm might look like this.

Role in the dealExample titlesWhat they care aboutWhen to write
Owns the problemHead of Sales, VP SalesNew reps hitting quota soonerFirst
Would run it day to daySales Enablement Manager, RevOps ManagerLess time building onboarding by handSecond, a week later
Uses itSales Manager, Team LeadFewer questions from new startersOnly if the first two go quiet
Signs or blocksCFO, COO, Head of ITCost, contract, security reviewOnce someone inside is interested

To find them, open the company's LinkedIn page, look through its people for the titles in your map, and note each person's name and profile link in your sheet. Two people with overlapping titles is common at mid-sized companies; pick the one whose posts or background match the problem.

In Bingle, opening a lead shows the colleagues Bingle found at the same company, which saves part of this step. Its connector for Claude and ChatGPT also has an account deep dive: it summarises who at a company is engaged and how, which members of the buying committee you have and which you're missing, and where each person is in outreach.

Watch the signals that belong to the company

Some buying signals belong to one person: a profile view, a comment on a competitor's post. Others belong to the whole account, and those are the ones that tell you to move on a target company this week rather than next quarter.

What it suggestsWho to write to first
Hiring for the team you sell to
That team is growing and has budgetThe manager the roles report to
A funding round
New money, usually with plans for hiring and toolsThe leader of the team the money is meant to grow
A new leader in your buyer's function
Tools and suppliers are about to be reviewedThe new leader, a few weeks after they start
Several staff engaging with your posts, a competitor or your topic
The problem is being talked about inside the companyThe most senior of them who fits your map

Each has its own guide: companies that are hiring, after a funding round and after a job change. How long each signal stays worth acting on is set out in LinkedIn buying signals, and how long each one lasts.

The last row is the one people miss when they work person by person. One engineer liking a competitor's post means little. Three people from the same 150-person company commenting on posts about your problem in a fortnight is worth more than any single signal among them, and you only see it if you look at the account.

Bingle rolls each company's people up into one account, and several engaged people at a company lift the account's score. For the hiring signal, it reads LinkedIn job posts for the role keywords you give it and picks out the hiring manager named on the post. The maths behind fit, intent and how signals combine is in how to score LinkedIn leads by fit and intent.

Write to several people at one company without spamming it

People at the same company talk, and some forward messages to each other. Five near-identical invites landing on one sales floor in the same morning reads as a campaign. These are the rules we'd follow:

  1. Start one new person per week at each account, and keep no more than two in an active sequence at once.
  2. Give each person their own angle. The Head of Sales hears about quota; the enablement manager hears about the hours spent building onboarding.
  3. Never send the same message twice inside one company, even with the name changed.
  4. Don't tell one person you've written to their colleague unless that colleague replied and is happy to be mentioned.
  5. When anyone replies, pause everyone else at that company. A no from the person who owns the budget usually ends the account for the quarter.
  6. Send inside their working hours. Sydney and Melbourne are on daylight saving until 4 April 2027, so they're an hour ahead of Brisbane and three hours ahead of Perth until then.

Here's how that might look over four weeks for one example account, using the buying group above:

WeekHead of SalesEnablement ManagerCFO
1Profile visit, then connection requestNothing yetNothing
2First message once they acceptProfile visit, then connection requestNothing
3One follow-upFirst message once they acceptNothing
4Stop if no replyOne follow-upOnly if someone has replied with interest

Two example first messages, written as I'd send them. To the Head of Sales, after a funding round: "Congrats on the Series A. I'm guessing a chunk of it goes on new reps. How long does it take a new AE to close their first deal at the moment?" To the enablement manager, a week later: "Your team is hiring again, so I'm guessing onboarding docs are on your plate. Are you building them yourself or using something?" Neither mentions the other person.

LinkedIn caps how many invitations and messages you can send, and an account program spends them slowly by design. The limits are covered in LinkedIn's connection request limit and daily message limits.

In Bingle, any reply stops a sequence for that person, and a sequence's Settings can stop it for the whole company on any reply. The same settings can skip people you're already connected to and set a send window. Message drafts wait in an approval queue for you to approve, edit or regenerate, unless you switch review off. Rejecting a lead for a company reason leaves out everyone at that company, which is how you take an account off the list.

Measure by account, not by message

Acceptance rates and reply rates per message still matter for fixing your copy. They don't tell you whether the program is working. For that, count companies, once a month:

What it tells you
Accounts with a fresh signal
Whether your list still has timing on its side
Accounts with two or more people connected to you
Whether you're reaching the buying group or just one contact
Accounts with a reply from anyone
Whether the angles are landing
Accounts with a meeting booked
Whether replies are turning into sales conversations
Accounts won or lost
The result, and the reasons to feed back into the list

Review the list every quarter. An account with no signal and no reply from three people after about six weeks goes back on the bench, and a company from the bench takes its place. Write down why each lost account was lost; after a quarter or two, those notes tell you which kinds of company to stop putting on the list.

Bingle lets you mark a lead Interested, Meeting booked, Won or Lost, and Export CSV downloads the current view for counting in a spreadsheet. It covers the LinkedIn side only: it doesn't send cold email and has no self-serve CRM integration, so if your account program runs across email and a CRM, Bingle handles the LinkedIn part and the reporting lives elsewhere. Bingle starts with 7 days free and no card, then plans begin at US$49 a month (pricing). For more on choosing who to contact and when, see the blog.

Questions

What is account-based marketing in simple terms?

Picking a short list of companies you most want as customers and aiming your marketing and outreach at the people inside them, instead of at anyone who fits a title. LinkedIn's 2016 primer describes it as tailoring messages "directly to those few accounts, or even individuals."

How many target accounts should a small team have?

We'd suggest 20 to 50 for one person working the list part time, with a bench of 10 to 20 to swap in. Fewer leaves you idle when accounts go quiet; more and you lose track of what's happening at each one.

What is the difference between ABM and lead generation?

Lead generation starts from people and takes any company they work at. Account-based marketing starts from named companies and then finds the people who matter inside each, so success is counted in companies engaged rather than leads collected.

How many people should I contact at one company on LinkedIn?

Map three to six, but have no more than two in an active sequence at once, starting a new person about a week apart. Give each one a different angle and pause everyone when anyone replies.

Can you do account-based marketing on LinkedIn without ads?

Yes. The outreach half needs only a target list, the people mapped at each company and a steady pace of personal messages. LinkedIn ads can add reach later, since LinkedIn lets advertisers upload a list of companies to target, but they aren't required to start.

Sources

  1. LinkedIn Marketing Solutions, The ABCs of ABM: Your Account Based Marketing Primer. published 8 Dec 2016, read 30 Oct 2026
  2. LinkedIn Pressroom, LinkedIn is the place to B2B at Cannes Lions 2024. published 17 Jun 2024, read 30 Oct 2026
  3. LinkedIn Help, Targeting options for LinkedIn Ads. read 30 Oct 2026
  4. NSW Government, Daylight saving. read 30 Oct 2026

More from the blog

All posts

See who's looking right now

Your first leads show up in minutes, each with its reason. Free for 7 days, no card.

Not ready to start yet?

Now and then, an email about a new signal or something I've learned about timing outreach. Confirm by email, unsubscribe any time.