How-to

How to follow up on LinkedIn when someone accepted but didn't reply

Someone accepted your invite, or read your message, and said nothing. You get one or two follow-ups on LinkedIn before silence becomes an answer, and a bump with nothing new in it spends one of them. This guide covers what LinkedIn's message indicators do and don't tell you, from its help pages as they read on 2 November 2026, how long to wait, how many follow-ups to send, seven examples tied to a fresh reason, the ones to avoid and when to stop. We make Bingle, which runs LinkedIn sequences with wait steps and stops them on any reply.

7 days free. No card. Then US$79/mo · See pricing

By the Bingle team · Published 2 November 2026 · Researched from the sources listed below, drafted with AI help and checked against those sources

Short answer

How do you follow up on LinkedIn when someone accepted but didn't reply?

Wait about a week after your first message, then send a short follow-up that adds one new thing, such as a post they wrote, a new role, a job ad or a company announcement, and ask one question. Send a second one two to three weeks later only if you have another new reason, then stop and write again only when something new happens. Bingle runs this as a LinkedIn sequence with wait steps, drafts each follow-up for your OK and stops the moment they reply.

How we researched this

On 2 November 2026 we read LinkedIn's help pages on messaging connections, message indicators, read receipts and typing indicators, message nudges and the messaging overview. The example follow-ups are for a made-up seller of expense software writing to made-up people; we scored each one in the Follow-up mode of Bingle's message checker on 2 November 2026. The timing is the rule we write by, not a measured result, and we didn't test reply rates.

What LinkedIn tells you after you send a message

A message you send on LinkedIn moves through three states: sending, sent and read. When the other person reads it, a small profile photo appears next to it. That only happens when read receipts are on. LinkedIn's page on message indicators says that if the recipient has turned off read receipts and typing indicators, you won't see when they've read your message, and the status stays at Sent. So Sent doesn't prove they haven't read it.

Two more details change how to read the silence. LinkedIn's help page on messaging connections says a message lands in their LinkedIn inbox and may also go to their email, depending on their notification settings, so some people read you in an email preview without opening LinkedIn. And LinkedIn's message nudges, which are on by default, remind people to respond to important messages, with a reminder next to the ones they haven't answered. The page doesn't say which messages count as important, so don't rely on it for yours. Still, a follow-up whose only job is to remind them is doing what LinkedIn may already do.

What it tells youWhat to do
Invite accepted, no reply to your first message
They were happy to connect. It says nothing about interest in what you sellWait about a week, then follow up with something new
Your message shows as read, no reply
They opened it and didn't answer, yetWait a bit longer than you would for Sent, and never mention the read status
Still showing Sent after a week
Unread, or read with read receipts switched offWrite the follow-up so it makes sense on its own
A message request to a coworker or group member
LinkedIn shows read receipts only after they accept the requestOne follow-up at most
An InMail
LinkedIn doesn't show read receipts to InMail sendersJudge it by replies alone; see InMail limits

How long to wait, and how many follow-ups to send

No LinkedIn help page sets a follow-up schedule, and we haven't measured one, so the table below is the rule we write by. It assumes your buyer reads LinkedIn between meetings and won't remember your first message a month from now.

WhenWhat it has to add
First message
A working day or two after they accept, while the invite is freshWhy you connected, in a sentence, and one question
Follow-up 1
About a week after the first messageOne new thing: a post they wrote, a new role, a job ad, company news, or something useful you left out
Follow-up 2
Two to three weeks after follow-up 1, only with a fresh reasonA different new thing. If nothing has happened, skip it
Stop
After follow-up 2, or sooner if two messages are read and leftNothing. Wait for a new signal and start a new conversation

That's three messages in about a month, at most. A message that shows as read earns a longer wait before the next one, not a shorter one: they saw it and chose not to answer yet, and a reply within a day reads as if you were watching the receipt.

Send when they are likely to read it. Sydney and Melbourne are on daylight time (AEDT, UTC+11) until 4 April 2027, so 9am there is 11am in Auckland and 6am in Singapore. For a buyer in Singapore, 9am their time is noon in Sydney. Pick their morning, not yours.

The cap of two follow-ups is about how you're remembered, not a LinkedIn rule. LinkedIn's messaging overview says anyone who gets a message they find inappropriate can report it as spam. A third and fourth nudge with nothing new in them gives people a reason to use that button.

Seven follow-ups, each with a reason

Each example follows a first message that got no reply. The seller is made up (I sell expense software to finance teams at Australian mid-size companies), and so are the people and companies. Every one is in the first person, asks one question at most, and starts without a greeting, because it continues a thread you already opened. Each scored 100 in the Follow-up mode of the message checker on 2 November 2026.

A new post they wrote (171 characters): "Your post on Tuesday said month-end close at Northwind runs into the fourth working day. Which part takes longest, the receipts from the field or the approvals after them?" Their own post is the best reason to come back, because it's what they are thinking about this week. Pick out one point from it rather than praising the whole thing.

A job change (165 characters): "I see you've started as CFO at Harbourline. My last note was about card approvals at Coastal, so it's out of date now. What are you looking at first in the new role?" The person who ignored you at the old company is a new reader at the new one. Say the earlier message no longer fits and ask about the new job. More in the guide to outreach after a job change.

A company announcement (178 characters): "I read that Brightwater opened its Perth office this month. A second state usually means a second set of expense rules for a while. Is Perth running on the Sydney policy for now?" An office opening, a merger or a big contract changes the work your product touches. Name the announcement and ask what it changes for them.

A job ad (104 characters): "I noticed Fernway is hiring an accounts payable officer. Will chasing late receipts be part of that job?" A job ad tells you where the team is stretched. Ask about the work, not the hire, and don't guess why they are hiring. There's more on companies that are hiring.

Read, no answer (152 characters): "One thing I left out last time: a one-page checklist your team could use to set card limits by role before a rollout. Would it help if I pasted it here?" When the first message was read and left, add something they can use and make the ask small. A yes to a checklist costs them one word; a yes to a call costs them a slot in their calendar.

A shared event (157 characters): "Are you going to the CFO breakfast in Melbourne on 19 November? I'll be there, and I'd rather hear how you handle approvals over a coffee than over messages." If you'll both be in the same room, a hello in person is an easier yes than a meeting invite. Only send this if you really are going.

The last message (160 characters): "I'll leave it here so I'm not filling your inbox. If receipts at month end ever become a problem worth fixing, send me a message and I'll pick it up from there." A closing message says you won't keep writing and leaves them a way back. It asks nothing, so they don't owe you an answer.

Follow-ups to avoid

Each of these announces a follow-up without adding anything. We put them through the same checker on 2 November 2026. It flagged every one.

  • "Just bumping this to the top of your inbox. Any thoughts on my last message?" Flagged as an empty follow-up, a major issue.
  • "I noticed you read my message but didn't reply. I know you're busy, but did you get a chance to look?" Flagged as a guilt trip and as apologising for the message. Mentioning the read status tells them you were checking.
  • "Following up on my previous message. Would you be open to a quick 15-minute call this week to see if we're a fit?" Following up says nothing, and a call is a big ask from someone who hasn't answered a small one.
  • "Not sure if you saw my message, so I'm sending it again." No question and no new reason.
  • Pasting the first message again word for word. If it didn't get an answer the first time, the second copy won't.
  • Opening every follow-up with "Hi Sam," again. Inside an open thread a fresh greeting reads like a template restarting, and the checker marks it as a small issue.

A checker reads the words, not whether you had a reason to send them. If it flags the follow-up as empty, no rewording fixes it. Find a reason or don't send it.

When to stop following up

  • Stop when they reply with any answer, including no. A no gets a thank-you and nothing else.
  • Stop after two follow-ups with no reply.
  • Stop when two of your messages show as read with no answer. They've seen enough to decide.
  • Stop and set a date when they say not now and name a time. Write then, about whatever has changed.
  • Stop when you can't think of anything new to say. That's the plainest signal of all.

Stopping doesn't close the door for good. A new role, a post about the problem you solve or a funding round is a fresh reason, and a message about it months later is a new conversation rather than a fourth follow-up. Open it like one: name the new thing in the first line and don't apologise for the gap. Our guide to tracking when customers change jobs covers one of the most useful of those reasons.

How Bingle runs follow-ups

We make Bingle, so here is how it handles follow-ups, taken from its user guide. A sequence is a set of LinkedIn steps that you build by describing it to the AI or starting from a template. The steps include Visit profile, Follow, Like latest post, Send invite, LinkedIn message and Wait, so a follow-up is a Wait step of the length you choose and then another message step. Each message step is either written by AI for each lead or fixed text you write once.

Any reply stops the sequence. In a sequence's settings you can also stop it for everyone at the same company when one of them replies, skip people who are already 1st-degree connections, and set a send window. A new sequence stays a draft until you press Start. Once it runs, each message draft waits in the Approval queue for you to approve, edit or regenerate, unless you switch review off for that sequence. Profile visits, likes and invites without a note run on their own. If you'd rather send by hand, switch off automatic sending in Settings and each step lands in Today's sends, where you copy the message, send it on LinkedIn and mark it sent.

The Inbox shows whether each message you sent is Delivered or Seen, and has filters for Seen (they read it but haven't replied) and Follow up. Bingle rechecks the status of your 20 newest chats once every 4 hours. People who replied, engaged with you or went into a sequence are watched for a job change, and when one moves they come back as a lead at the new company: the kind of new reason this guide says to wait for.

Bingle sends from your own LinkedIn in your working hours and never sees your LinkedIn password. It's 7 days free with no card, then from US$49 a month; see pricing. For the first message before any follow-up, see connection notes for each buying signal, and there are more guides on the blog.

Questions

How long should you wait to follow up on LinkedIn?

About a week after your first message, then two to three weeks before a second follow-up. LinkedIn doesn't set a schedule; that's the rule we write by, and a message that shows as read gets a longer wait, not a shorter one.

How many times should you follow up on LinkedIn?

Twice at most after the first message, and only when each one adds something new. After that, wait for a new reason, such as a job change or a post they write.

Does LinkedIn show if someone read your message?

Yes, when read receipts are on: a small profile photo appears next to your message. If they have turned off read receipts and typing indicators, LinkedIn keeps showing Sent even after they read it.

Should I mention that they read my LinkedIn message?

No. It tells them you were checking and gives them nothing to answer. Add something new instead, such as a post they wrote or a useful thing you left out.

What should a LinkedIn follow-up message say?

One new thing and one question: a post they wrote, a new role, a job ad, a company announcement or something useful you left out last time. Skip the greeting when you are continuing the same thread.

Can you follow up on LinkedIn with someone who isn't a connection?

LinkedIn's help page says you can only message your connections. To reach anyone else you need a message request, for coworkers and group members, or an InMail, which needs Premium, and LinkedIn doesn't show read receipts to InMail senders.

Sources

  1. LinkedIn Help, Understand message indicators in LinkedIn Messaging. page shows last updated 1 year ago; read 2 Nov 2026
  2. LinkedIn Help, Delivery and typing indicators. read receipts, InMail and message requests; page shows last updated 1 month ago; read 2 Nov 2026
  3. LinkedIn Help, Send messages to connections on LinkedIn Messaging. page shows last updated 4 weeks ago; read 2 Nov 2026
  4. LinkedIn Help, LinkedIn message nudges. page shows last updated 1 month ago; read 2 Nov 2026
  5. LinkedIn Help, LinkedIn Messaging - Overview. page shows last updated 5 years ago; read 2 Nov 2026
  6. NSW Government, Daylight saving. AEDT ends 4 April 2027; read 2 Nov 2026
  7. govt.nz, Daylight saving. NZDT from 27 September 2026 to 4 April 2027; read 2 Nov 2026

More from the blog

All posts

See who's looking right now

Your first leads show up in minutes, each with its reason. Free for 7 days, no card.

Not ready to start yet?

Now and then, an email about a new signal or something I've learned about timing outreach. Confirm by email, unsubscribe any time.