How-to

Are LinkedIn groups still worth it for lead generation?

LinkedIn groups have a reputation as the place B2B sellers go to find buyers talking shop. They still exist, and one feature still matters for outreach: you can send a message request to a fellow member without connecting first. Most of the rest works against a seller. This guide sets out how groups work from LinkedIn's help centre as it read on 31 October 2026, the limits LinkedIn publishes, how to find a group that is still active, and how events compare. We make Bingle, which watches events and other buying signals but not groups.

7 days free. No card. Then US$79/mo · See pricing

By the Bingle team · Published 31 October 2026 · Researched from the sources listed below, drafted with AI help and checked against those sources

Short answer

Are LinkedIn groups still worth it for lead generation?

For most small B2B teams, groups are a weak lead source now: LinkedIn's own guidance tells members to avoid self-promotion and says links to commercial sites get removed, and most of its group help articles haven't been updated in three to five years. Keep a few active groups for the feature that still helps, a message request to a fellow member you aren't connected to, and put more time into LinkedIn events and dated buying signals, which Bingle watches along with likes and comments on competitors' posts.

How we researched this

On 31 October 2026 we read ten LinkedIn Help articles on groups (membership, joining, limits, message requests, public groups, visibility, member best practices, moderation, post approval and group analytics) and two on LinkedIn Events, noting the last-updated label on each. We searched for a LinkedIn announcement about groups from 2025 or 2026 and found none. We didn't measure reply rates from group messages.

How LinkedIn groups work in October 2026

You find a group by typing a topic or name into LinkedIn's search bar and choosing Groups. Joining means pressing Request to join, or accepting an invitation from a member or manager. LinkedIn's help page is blunt about who decides: "Membership approval is solely up to the group." Owners and managers review each request and can ask you for more information first.

Groups come in two kinds. In a public group, anyone on or off LinkedIn can read what members post, non-members can react but can't comment or post, and posts can appear in the feed and in LinkedIn search. In a private group, only members can read, post or comment, and LinkedIn says that activity isn't shown to your connections who aren't members. So a good post in a private group reaches that group and no one else.

Owners set the group's rules and joining criteria. They can also hold posts for approval: every post, posts with links to outside websites, or posts from anyone who joined in the past 30 days. A post that sits unapproved is deleted after 14 days. Owners and managers can remove or block a member, which deletes everything that member posted in the group.

LinkedIn's General limits for LinkedIn groups page, last updated a year before we read it, gives the numbers that matter to someone using groups for outreach:

LinkedIn's figure
Groups you can be a member of
100
Groups with a pending request to join
20
Posts in a single group each week
15
Groups you can post in each week
20
Total posts across all groups
60 (the page states no period for this one)
Characters in a group post
3,000
Characters in a comment
1,250
New message requests a group admin can send to unconnected members, per day
50
Members in one group
3 million

Messaging a fellow group member

This is the one part of groups a seller should know well. LinkedIn's message requests article says: "You can send a message request to communicate with coworkers or Group members that you aren't already connected with." On a free account, that is one of the few ways to write to someone outside your network without spending a connection request or paying for InMail.

  1. Open your Groups homepage and pick the group.
  2. Click See all to open the member list.
  3. Find the person and click Message next to their name.
  4. Write the message and send it. It arrives as a request.

The person can accept it or decline it privately, and LinkedIn doesn't tell you if they decline. You can't attach a file. LinkedIn also says it "may limit your ability to send messages to members you are not connected to," without giving a number, while the limits page caps group admins at 50 new message requests a day and sets no figure for ordinary members. Treat that silence as a reason to send a few well-chosen requests, not as permission to message the member list.

How this compares with the other ways in: a connection request counts against LinkedIn's invitation limits (our connection request limit guide has what LinkedIn says about those), and InMail needs credits from a paid plan (InMail limits). A group message request uses neither, which is why groups are still worth joining even if you never post in them.

Why groups are a weak lead source today

Groups are often pitched as an overlooked channel. The reasons they disappoint as a lead source come from LinkedIn's own help pages.

  • LinkedIn tells members not to sell. Its Contribute as a Group member page says "Avoid self-promotion" and "any URL to a commercial site that tries to sell a product or service will be reported and removed."
  • Cross-posting gets hidden. The same page says a post shared across several groups "could be automatically flagged as spam" and won't be shown to other members.
  • Private group posts stay private. Your connections outside the group don't see your activity there, so the effort reaches one room.
  • New members can be held back. An owner can require approval for posts from anyone who joined in the past 30 days, or for any post with an outside link.
  • The help pages have gone quiet. Most group articles we read show a last update three to five years ago.

That last point is a dated observation worth seeing side by side. On 31 October 2026, LinkedIn's help centre showed these last-updated labels:

Last updated, as shown on 31 Oct 2026
Find and Join a LinkedIn Group
5 years ago
Analytics for Group Admins
5 years ago
LinkedIn Public Groups
4 years ago
LinkedIn groups membership
3 years ago
Contribute as a Group member Best Practices
3 years ago
Moderate your LinkedIn group
3 years ago
General limits for LinkedIn groups
1 year ago
LinkedIn Events organized by individuals FAQ
9 months ago
LinkedIn Events overview
3 months ago

Nothing we read on LinkedIn's help centre announces a recent change to groups, and we found no LinkedIn announcement about them from 2025 or 2026. The public group feature is still described as arriving "gradually" on a page last touched four years ago. Groups still work as a place to listen and as a route to a message request. As a place to generate leads by posting, they rank low.

How to find an active group in your niche

Member count tells you little; a group can hold 3 million members and still be a car park for links. Judge a group on what happened in it this month. Before you request to join, or in your first week as a member:

  1. Ask three of your customers which LinkedIn groups they actually read. A group your buyers name beats any search result.
  2. Search your buyers' own words, the job title plus the problem ("payroll", "fleet maintenance", "SOC 2"), and choose Groups. Add a place name if you sell locally: Australia, Melbourne, Auckland, Singapore.
  3. Scroll the latest posts. Look for posts from the last two weeks that got comments, not just reactions, from people with your buyers' job titles.
  4. Count the questions. A group where members ask each other for advice is alive. A feed of article links with no comments isn't.
  5. Check who posts. If most posters sell to the same buyers you do, it's a vendor group, and your buyers probably aren't reading it.
  6. Read the rules. A group with written rules and post approval has someone moderating it, which usually means less spam.

One to three groups that pass are plenty. With 20 pending requests allowed at a time, you can apply to a shortlist, see which ones approve you, and leave the ones that turn out to be quiet.

Taking part without pitching, and when to message a member

Ten minutes, twice a week, is enough in a good group. Answer questions you know the answer to, with a specific example from your own work. When you post, ask a question instead of sharing a link, and if you do share a link, say in a line why it matters to that group, as LinkedIn's best practices page asks. Write each post for the group it's in, because LinkedIn may hide a post copied across several groups.

Message a fellow member only when there is a reason that came from them: they replied to your comment, they asked a question you can answer at more length than a comment allows, or you both took the same side of a thread and you'd like to continue it. A member list is not a reason. Neither is a shared group on its own.

A message request after someone asks for advice in the group can read like this, in the first person: "Hi Sam, saw your question in the group about chasing late timesheets from contractors. I went through the same thing with a 40-person crew last year and wrote up what fixed it. Happy to send it over if it would help." It names their question, offers something specific and asks for nothing. The detail about a 40-person crew only works if it's true for you, so swap in your own.

If they reply, the conversation is yours to carry. If they don't, leave it; a second request to someone who ignored the first reads as pressure. Before sending, our free LinkedIn message checker flags lines that read like a template.

Groups vs events, and where Bingle fits

Events are the closer cousin to what groups used to be, and LinkedIn updated their help pages this year. An event can be organised by a person or by a LinkedIn Page, online, in person or hybrid. Organisers and attendees can each send up to 1,000 invitations a week, only to their 1st-degree connections, and that cap is shared across all the events you run. Once someone accepts, they can see the list of LinkedIn members attending.

LinkedIn groupsLinkedIn Events
Who can start one
Any member, up to 5 groups a dayA person, or a LinkedIn Page through its admins
Who you can reach
Fellow members, by message requestYour 1st-degree connections, up to 1,000 invitations a week
Who you can see
The member listThe attendee list, once you've accepted
Promotion rules
LinkedIn says avoid self-promotion; commercial links get removedNo such warning in the two events help pages we read
A reason to write
A question or comment in the groupA shared, dated event
Help pages last updated
1 to 5 years ago3 and 9 months ago

An event gives you a dated reason to talk that a group rarely does. Our guide to turning event attendees into leads covers what to send before and after, and what LinkedIn lead generation covers sets groups and events next to the other methods.

Bingle doesn't list groups among its signals. Events are one of them: its FAQ counts going to an industry event as a buying signal, alongside likes and comments on competitors' and influencers' posts, engagement with your own posts, profile views, new roles, hiring and funding. It keeps the people who fit your ideal customer, ranks them by fit and timing with the reason shown, and drafts each message in your voice for your OK unless you switch review off. If you meet someone worth following up in a group, paste their LinkedIn profile link into Bingle and they're added as a lead.

Bingle sends from your own LinkedIn in your working hours and never sees your LinkedIn password. It's 7 days free with no card, then US$49 a month on Starter or US$79 on Growth, with plans on the pricing page. LinkedIn buying signals explains each signal, and our other guides are on the blog.

Questions

Can you message someone in a LinkedIn group without connecting?

Yes. LinkedIn lets group members send a message request to other members they aren't connected to, from the group's member list. They can accept or decline privately, and you can't attach files.

How many LinkedIn groups can you join?

LinkedIn's limits page says a member can be part of 100 groups and have pending requests to join 20 at a time.

Can I promote my product in a LinkedIn group?

LinkedIn's member guidance says to avoid self-promotion and that links to commercial sites selling a product or service will be reported and removed. Share expertise and save the offer for a private conversation someone asked for.

Why can't I post in a LinkedIn group I just joined?

The group's owner may require approval for posts from members who joined in the past 30 days, or for posts with outside links. Unapproved posts are deleted after 14 days. You may also have hit LinkedIn's cap of 15 posts in one group a week.

Are LinkedIn events better than groups for finding leads?

Usually, for a small team. An event gives you a dated reason to write and an attendee list you can see once you've accepted, and the events help pages we read carry no warning against promotion like the one on the groups pages.

Does Bingle find leads in LinkedIn groups?

No. Bingle's signals include events, engagement with competitors', influencers' and your own posts, profile views, job changes, hiring and funding, but not groups. You can paste the profile link of anyone you meet in a group to add them.

Sources

  1. LinkedIn Help, General limits for LinkedIn groups. last updated 1 year before reading; read 31 Oct 2026
  2. LinkedIn Help, LinkedIn groups membership. last updated 3 years before reading; read 31 Oct 2026
  3. LinkedIn Help, Find and Join a LinkedIn Group. last updated 5 years before reading; read 31 Oct 2026
  4. LinkedIn Help, Send, receive, and manage message requests. last updated 2 years before reading; read 31 Oct 2026
  5. LinkedIn Help, LinkedIn Public Groups. last updated 4 years before reading; read 31 Oct 2026
  6. LinkedIn Help, Visibility and impact of your social activity in groups. last updated 3 years before reading; read 31 Oct 2026
  7. LinkedIn Help, Contribute as a Group member Best Practices. last updated 3 years before reading; read 31 Oct 2026
  8. LinkedIn Help, Moderate your LinkedIn group. last updated 3 years before reading; read 31 Oct 2026
  9. LinkedIn Help, Review and approve posts in your LinkedIn group. last updated 3 years before reading; read 31 Oct 2026
  10. LinkedIn Help, Analytics for Group Admins. last updated 5 years before reading; read 31 Oct 2026
  11. LinkedIn Help, LinkedIn Events overview. last updated 3 months before reading; read 31 Oct 2026
  12. LinkedIn Help, LinkedIn Events organized by individuals FAQ. last updated 9 months before reading; read 31 Oct 2026

More from the blog

All posts

See who's looking right now

Your first leads show up in minutes, each with its reason. Free for 7 days, no card.

Not ready to start yet?

Now and then, an email about a new signal or something I've learned about timing outreach. Confirm by email, unsubscribe any time.